Article sections

    How can I add a pedelec, PAS or pedal assist?

    There are two ways to do the pedelec.

    If you have a Smart Pie 5, Magic Pie 5, Black Pie 5 or Magic Pie Edge kit with the internal Vector controller you can use PAS

    PAS Sensor:
    You can add a Smart Display and a pedelec ring or a Bluetooth device (for Android 4.4 and up) and a pedelec ring. This will give you 5 different power assist settings. This is the most common system used by most Ebikes.

    Any kits we have including those listed above can use a Cycle Analyst V3 for a PAS or true torque sensing pedelec.

    PAS Sensor:
    You can add a Cycle Analyst V3 and a CA3 pedelec ring. This will give you 3 different power assist settings. The advantage of this is you can completely edit and set the assist levels.

    Torque Sensor:
    You can add a Cycle Analyst V3 with a torque sensor in the bottom bracket. This system detects how hard you are pushing on the pedals and gives a proportional assist. The harder you push on the pedals the more assist it provides. You can create 3 profiles with the Cycle Analyst system.

     

    in PedelecProducts