Find Your Product Instructions
< All Topics

Programming Internal Controller With USB Cable

Programming Using a USB Programming Cable

To do this, you will need a Windows computer and a USB Programming Cable.

  1. Download and open the following programming software (PI-800):
    https://www.goldenmotor.com/controllers/PI-800.rar
  2. Connect the USB programming cable to the display/bluetooth 5-pin plug on the motor wire harness. Plug the USB into your computer.
  3. Turn the bike battery ON.
  4. Select your USB COM port beside the blue helmet on the programming software screen, there will be one correct option.
  5. Click the blue helmet on the top left of the programming software screen to connect to your controller. After changing a value, click the download button with the curved green arrow at the top to save that value on your controller.
  6. To make sure the parameter was programmed correctly, click the blue helmet again and check if your updated parameter is there.

Take a look at this video to see how it’s done. You can skip the beginning of the video about determining your COM port because the correct COM port should be visible automatically in the programming software.

Table of Contents
Shopping cart
Sign in

No account yet?

Sidebar
Start typing to see products you are looking for.