Programming External Controller
How to Program the External Magic Controller
The External Magic Controller can be programmed using this USB Programming Cable with the software below. Note that the battery should be OFF or disconnected when programming.
External Controller Programming Software
External Magic Controller Wiring
Magic Controller Wiring The External Magic Controller is a 25 amp universal controller that can be used for any build. It comes with all of our external hub kits along with parts such as throttle, brakes, etc. Magic Controller V2...
Troubleshooting External Hub Kits
Throttle is Not Working / General Troubleshoot: Follow these troubleshooting steps: Are all the lights on the throttle on? Do they stay on when you try to use the throttle? if you answered yes to both questions then proceed to...
Why is my horn going off by itself? If you connect the battery and your horn starts going off by itself, it’s indicating something. If it goes off repeatedly, it is indicating an error code. Count the number of times...
How to Install an External Hub Motor Kit To view our selection of hub motors, click here. Note: Whenever you receive a hub motor wheel from us, make sure that none of the spokes are loose; you can tighten them with a...
How to Spoke/Lace a Wheel We sell motor-specific spokes and spoke wrenches on our store. The links can be found at the bottom of this article. Replacing a Broken Spoke Spokes can break if they are over-stressed or haven’t been...