







Mid Shaft Nut Tool | 4-Prong Double-Ended | Surron LBX | E Ride Pro
Couldn't load pickup availability
Pickup available at Shop location
Usually ready in 24 hoursPairs well with
Product Description
Double-Ended 4-Prong Mid Shaft Nut Tool for Surron LBX and E Ride Pro
Before you can swap a sprocket, replace intermediate shaft bearings, or convert to a primary chain drive, the 4-prong castle nut on the mid shaft (jackshaft) has to come off. Screwdrivers and punches round it out fast. This tool seats on all four prongs so you can break the nut loose and torque it back down without chewing it up.
It's double-ended, so one tool covers both common shaft sizes. Handy if you work on more than one bike or run a shop.
Features
- Two sizes in one tool: 10mm shaft on one end, 12mm shaft on the other
- Full 4-prong engagement for a solid, no-slip bite on the castle nut
- Drives with a standard 1/2" ratchet, breaker bar or torque wrench extension
- Machined steel, made for repeat use
Fitment
- Small end (10mm mid shaft): Surron Light Bee (LBX), E Ride Pro S, SS and 2.0
- Large end (12mm mid shaft): E Ride Pro 3.0 and SR
Note: this tool does not fit the Talaria X3 (XXX) mid shaft nut.
Not sure which shaft your bike has? Send us your model and year and we'll confirm fitment before you order.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
