Surron Light Bee Wiring Harness OEM
Couldn't load pickup availability
Pickup available at Shop location
Usually ready in 24 hoursPairs well with
Product Description
The main wiring harness is what ties your Surron Light Bee together: controller, battery, throttle, display, lights and switches all run through it. When it gets chafed, pinched in a crash, corroded at the plugs or cut into by previous mods, you end up chasing intermittent cutouts and dead switches. Replacing the harness is usually the cleanest fix.
This is an OEM replacement harness for the Light Bee, so it uses the factory connectors and routing. No splicing, no guessing which wire goes where.
Good to know
- OEM Surron replacement part
- Fits: Surron Light Bee
- Uses the factory plugs and routing
- Sold as one complete main harness
Install tips
- Disconnect the battery before you start.
- Take a few photos of the old harness routing and every plug before you pull it out. It makes going back together a lot faster.
- Route it the same way as the original and keep it away from moving parts and sharp edges, then zip tie it back in place.
Not sure the harness is your problem? Send us a message with what the bike is doing and a few photos, and we'll help you track it down before you buy.
Related Products
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
