Free Shipping on Orders $500 to US & Canada *Exclusions apply

Product Description

Power your electric vehicle or high-performance electric system with the 51.2V 54Ah Lithium Iron Phosphate (LiFePO4) Battery. Designed for high-capacity applications, this battery offers substantial energy storage, high continuous discharge capability, and integrated battery management protection.

With a nominal capacity of 54Ah and a 200A continuous discharge rating, this battery is designed for applications requiring reliable, sustained electrical power. Its integrated Battery Management System (BMS) protects against key electrical faults.

Key Features

  • 51.2V nominal voltage

  • 54Ah rated capacity

  • Approximately 2,765Wh of nominal energy

  • 200A maximum continuous discharge current

  • Integrated 200A BMS

  • 58.4V full-charge voltage

  • Lithium Iron Phosphate (LiFePO4) chemistry

  • Designed for high-current applications

  • 58.4V 5A charger included

51.2V 54Ah LiFePO4 Battery Pack

Specification Details
Battery Chemistry LiFePO4 (Lithium Iron Phosphate)
Cells 27Ah LiFePO4 cells
Configuration 16S2P
Nominal Voltage 51.2V
Nominal Capacity 54Ah
Nominal Energy 2,764Wh
Charge Voltage 58.4V (CC/CV)
Discharge Cutoff 36.8V
Max Continuous Discharge 200A
Max Charge Current 200A
Charging Time ~11.5 hrs (5A charger)
Cycle Life 1,000+ cycles (≥80% capacity)
BMS Protection
BMS Rating 16S 200A
Overcharge (per cell) 3.75V ± 0.05V
Overdischarge (per cell) 2.3V ± 0.1V
1st Overcurrent 210A ± 20A (60s delay)
2nd Overcurrent 300A ± 80A (1000ms delay)
Short Circuit 1200A ± 300A (~62µs delay, auto-recover ~5s)
Physical
Dimensions (L×W×H)

320 × 160 × 292 mm

12.6*6.3*11.5 Inch

Weight ~24 kg (~53 lbs)
Discharge Connector Anderson 120 (6 AWG lead, 100 mm)
Charge Port Canon 3-pin DC (male)
Charger 58.4V 5A charger included (Canon 3-pin DC plug)
Output Wires 6AWG (UL3135)
Charge Temp Range 0°C to 45°C
Discharge Temp Range -20°C to 60°C

Charging Information

A 58.4V 5A LiFePO4 charger with a Canon 3-pin DC plug is included. Charging from empty takes about 11.5 hours with the included 5A charger.

Compatibility

Before purchasing, verify that your motor controller or electrical system supports a 51.2V nominal battery, accepts the fully charged voltage of 58.4V, and is compatible with the battery's discharge capabilities.

For high-power applications, confirm that the controller's voltage and current requirements, connectors, wiring, and BMS specifications are suitable for your setup.

What's in the Box

  • 1 × 48V (51.2V) 54Ah LiFePO4 battery pack (metal case)
  • 1 × 58.4V 5A LiFePO4 charger (Canon 3-pin DC plug)
  • Anderson 120 discharge lead (6 AWG, 100 mm)

How to Maintain Your 51.2V 54Ah LiFePO4 Battery

Proper battery care helps maintain performance, extend service life, and ensure safe operation. Follow these recommendations for the best results.

  • Use the correct charger: Use a charger specifically designed for a 51.2V LiFePO4 battery with a maximum charging voltage of 58.4V. Avoid using chargers intended for other battery chemistries or voltage ratings.

  • Avoid extreme temperatures: Charge the battery between 0°C and 45°C (32°F–113°F). The specified discharge temperature range is -20°C to 60°C (-4°F–140°F). Allow a battery that is too hot or too cold to return to a suitable temperature before charging.

  • Store it properly: Keep the battery in a cool, dry, well-ventilated location, away from direct sunlight, heaters, moisture, and fire. For long-term storage, follow the manufacturer's temperature and storage-charge recommendations.

  • Avoid excessive discharge: Do not deliberately run the battery until it shuts down. Recharge it when practical, and avoid leaving it fully discharged for extended periods.

  • Keep connections clean and secure: Inspect the connectors, wiring, and terminals periodically for looseness, corrosion, damage, or unusual heating. Disconnect the battery before inspecting connections, where safe and appropriate.

  • Protect it from physical damage: Avoid dropping, crushing, puncturing, opening, or modifying the battery. Keep it dry unless the manufacturer explicitly confirms its water-resistance rating.

  • Monitor during charging: Charge in a suitable, ventilated area and follow the charger's instructions. Stop charging if you notice swelling, smoke, unusual odor, excessive heat, or damaged wiring.

  • Check before use: Inspect the battery and its wiring regularly. If the battery repeatedly cuts out, will not charge normally, or shows signs of damage, discontinue use and contact technical support.

Important: This battery has a nominal voltage of 51.2V and a specified full-charge voltage of 58.4V. Always verify charger and controller compatibility before connecting it to your system.

  • We provide 12 months warranty