











Heavy Hitter MX Direct Mount Riser Fat Bar 1 1/8" Clamp
Pairs well with
Product Description
The Heavy Hitter MX Direct Mount Riser is a 7075-T6 aluminum stem that lets you run 1 1/8 inch motocross fat bars on an e-moto with a mountain bike style dual crown fork. Bend a 31.8 mm bar mid-trip and the ride is over, because nobody nearby stocks one. Moto bars are on the shelf at any dirt bike shop, and this riser clamps them directly over the stem with 1.75 inches of rise. The kit includes a bottom clamp, a top clamp and eight stainless screws.
Fitment:
- Universal 1-1/8 Inch Bars on MTB Dual Crown Forks
NOTE: The steering tube must be trimmed to length to fit this stem
The wide clamping area stiffens the bar. Putting the bar directly over the stem is standard on motorcycles, and it sharpens steering and makes the bike easier to flick around at low speed. A comfortable rider is a faster rider.
The body is anodized and weighs 1 lb. It bolts to stock and most aftermarket forks.
You need 5 mm and 6 mm Allen wrenches, a torque wrench and blue medium-strength thread locker. Torque the four M6 screws to 8.5 Nm (6.3 ft-lb) and the four M8 top clamp screws to 18 Nm (13 ft-lb), tightening them evenly. The tech sheet has the full steps.
Running 31.8 mm bars instead? Use the 2 inch direct mount stem.
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
Shipping Information
Use this text to answer questions in as much detail as possible for your customers.
Customer Support
Use this text to answer questions in as much detail as possible for your customers.
FAQ’s
Use this text to answer questions in as much detail as possible for your customers.
Contact Us
Use this text to answer questions in as much detail as possible for your customers.
