Free Shipping on Orders $500 to US & Canada *Exclusions apply

Product Description

This Surron Ultra Bee front brake assembly is a direct stock replacement: caliper, line, and master cylinder, pre-bled and ready to bolt on. Add our front mount and a 240mm rotor and it runs on a Surron Light Bee, Eride Pro, or Talaria.

What's in the box?

  • 1 front brake caliper with pads installed, pre-bled through the OEM front brake line to the front master cylinder, filled with Motul DOT 5.1 brake fluid.
  • Banjo bolts and crush washers, installed.

Specs:

  • Pre-bled with Motul DOT 5.1 - no bleeding on install, the system is full and sealed when it arrives.
  • Pads installed in the caliper - nothing to fit before the first ride.
  • Green caliper with a matching green master cylinder body and silver lever - matches the stock Ultra Bee front end.
  • Right-hand front lever - same position as the stock front brake.
  • OEM front brake line - the stock line length and routing for the Ultra Bee front end.
  • Two caliper options, same internals - Ultra Bee Custom (Green FactoryZ Caliper) or OEM Surron Brand (Green Caliper).

Fits these models:

  • Surron Ultra Bee (all years)

  • Surron Light Bee (with front Ultra Bee brake mount and 240mm front rotor)
  • Eride Pro S (with front Ultra Bee brake mount and 240mm front rotor)
  • Eride Pro SS 2.0 (with front Ultra Bee brake mount and 240mm front rotor)
  • Talaria X3 (with front Ultra Bee brake mount and 240mm front rotor)
  • Talaria MX3 (with front Ultra Bee brake mount and 240mm front rotor)
  • Talaria MX4 (with front Ultra Bee brake mount and 240mm front rotor)

On the Light Bee, Eride Pro, and Talaria, this assembly needs the front Ultra Bee brake bracket and the 240mm rotor. Pick your model and the front rotor, floating or solid.

Does NOT fit: Surron Hyper Bee, Surron LB2, Eride Pro SR, Eride Pro SS 3.0, Eride Pro SS 4.0

Surron Ultra Bee Front Brake Assembly FAQ

Will this fit my Surron Ultra Bee?

Yes. It replaces the stock front brake on every year of the Surron Ultra Bee. 

Can I run it on a Light Bee, Talaria, or Eride Pro?

Yes, on the Surron Light Bee, Eride Pro S, Eride Pro SS 2.0, Talaria X3, Talaria MX3, and Talaria MX4. You need the front mount and a 240mm front rotor for your model. It does not fit the Hyper Bee, the LB2, or the Eride Pro SR, SS 3.0, and SS 4.0.

Is it pre-bled?

Yes. The caliper, line, and master cylinder ship connected and bled, with the pads, banjo bolts, and crush washers already in place. Mount it, torque it, ride.

What brake fluid is in it?

Motul DOT 5.1. Top off or rebleed with DOT 5.1 to keep the system on one fluid.

FactoryZ caliper or OEM Surron caliper?

Both are green and share the same metal, seals, and pistons, so they stop the same. The OEM Surron caliper carries Surron branding and a slightly larger body. The FactoryZ caliper costs $100 less.

Is the brake line steel-braided?

No. This assembly uses the OEM front brake line. Our steel-braided Ultra Bee brake line is sold separately if you want to swap it.

Ships from USA!