Steel Braided Rear Hand Brake Line for Moto Brakes | Surron Ultra Bee, Light Bee, Talaria, Eride Pro

A steel braided rear hand brake line for the Surron Ultra Bee and for moto brake conversions on the Surron Light Bee, Talaria and Eride Pro. Braided hose holds its shape under pressure, so the lever stays firm and you get the same bite on the last run as on the first.

Specs

• Stainless steel braid over a PTFE inner line
• Clear PVC outer jacket keeps dirt and grit off the braid
• M10 banjo fittings on both ends
• 90° banjo at the master cylinder and 28° banjo at the caliper, angled so the line clears the swingarm through full suspension travel
• Pre-cut and crimped, ready to install

Fitment

• Surron Ultra Bee (OEM brakes and big brake kit)
• Surron Light Bee / LBX (moto brake conversions only)
• Talaria X3 (XXX) / MX3 / MX4 / MX5 (moto brake conversions only)
• Eride Pro S / Pro SS 1.0 / 2.0 / 3.0 / SR (moto brake conversions only)

One line fits every bike on this list. On the Light Bee, Talaria and Eride Pro it's made for a moto-style caliper like the Ultra Bee caliper, not the stock MTB-style caliper.

Install Notes

1. Use fresh copper crush washers on both banjo bolts.
2. Bleed the system with the brake fluid specified for your master cylinder.
3. Check lever feel and line routing at full suspension compression before you ride.

Build Out Your Moto Brake Setup

• Steel Braided Foot Brake Line
• Ultra Bee Rear Brake Kit for Surron Light Bee & Eride Pro
• Ultra Bee Rear Brake Kit for Talaria X3, MX3 & MX4
• 240mm Floating Moto Brake Rotor

In stock and ships from the USA.