If you're shopping for Ultra Bee brakes, it helps to know the term means two things. On a Surron Ultra Bee, the stock brakes are already moto-style calipers on 240mm rotors, so most owners are replacing crashed or worn OEM parts or adding a foot brake. On a Light Bee X, Talaria X3 or Talaria MX3 / MX4, "Ultra Bee brakes" means a conversion: an Ultra Bee caliper, a 240mm rotor and an adapter bracket bolted to a smaller bike. Below is what each part does, which bike it fits, and what else you need so you don't end up with a bracket and no rotor.
Brakes are the one system you can't get half right. If you're not comfortable bleeding a hydraulic brake or torquing banjo bolts, have a motorcycle or e-moto shop do the install.
Ultra Bee brakes vs Light Bee X and Talaria brakes
People use "Ultra Bee brakes" for two different things:
- The brakes that come on a Surron Ultra Bee. Hydraulic calipers on 240mm rotors, with the front and rear master cylinders on the bar. The stock levers have a parking brake.
- An upgrade for smaller bikes. The Light Bee X, Talaria MX3 / MX4 and Talaria X3 (also sold as the xXx) use smaller bicycle-style brakes on 203mm rotors. Swapping in the Ultra Bee caliper, a 240mm rotor and an adapter bracket is what people call a "moto brake" conversion.
The reason to convert is pad and rotor size. A moto caliper has a much bigger pad, and a 240mm rotor gives it more leverage and more steel to soak up heat. The bracket maker claims up to 300% more pad surface area than the stock caliper. We haven't measured that, but the size difference is obvious side by side.
Still deciding between the two bikes? Our Light Bee X vs Ultra Bee comparison covers power, weight and price.
Why riders add a Surron foot brake
These bikes come with the rear brake on the left hand lever, like a bicycle. Riders coming from gas dirt bikes want it under their right boot: that's where their foot goes in a panic, it's how you drag the rear wheel on steep descents while standing, and it leaves the left hand free to grip.
There are two ways to set it up:
- Foot brake only. The pedal takes over the rear caliper and the left hand lever comes off that caliper. Simplest and cheapest.
- Foot brake plus hand brake. A dual caliper bracket (sometimes called a dual caliper mount) puts two calipers on the rear rotor, one fed by the pedal and one by the hand lever. Handy on technical trails, or if more than one person rides the bike.
Foot brake kits by bike
Ultra Bee foot brake
The Surron Ultra Bee Foot Brake Mount Bracket fits every Ultra Bee year. The box has the bracket, foot lever, peg, an HSK master cylinder, a steel-braided line, the return spring and mounting hardware. The line runs to your stock rear caliper, so on its own it replaces the hand rear brake.
To keep the hand lever too, add the Ultra Bee dual caliper bracket (it holds two OEM Ultra Bee rear calipers on the stock 240mm rotor) and a second rear caliper.
It does not fit the Light Bee, Talaria, E Ride Pro or Tuttio Soleil 01. Those bikes have their own brackets.
The kit ships dry. Fill it with DOT 3, DOT 4 or DOT 5.1 and bleed it once the line is on the caliper. If the foot master cylinder ever leaks or gets smashed, the Ultra Bee foot brake master cylinder is sold on its own. It's Ultra Bee only: the mounting holes are different and the pushrod is longer than the HSK unit used on Light Bee and Talaria foot brakes.
Talaria MX3 / MX4 / MX5 foot brake
The Talaria Foot Brake Mount Bracket fits the MX3, MX4 and MX5, all years. Three things to know before you order:
- The master cylinder is DOT 4 only. Mineral oil will swell its seals.
- The included line is for the DOT 4 OEM caliper on the MX3 and MX4. There is no line for the MX5 yet.
- If you run a mountain bike caliper with a banjo fitting (Hope Tech 4 V4, SRAM, Magura, TRP, Hayes Dominion), you'll need a custom foot brake line for it.
Check your rear caliper's fluid before you buy. The listing calls the MX3 / MX4 OEM caliper DOT 4, but we've also seen a stock Sting rear caliper that runs mineral oil, and Talaria has used more than one brake supplier. A DOT master cylinder can't share a system with a mineral oil caliper. Look at the reservoir cap or the caliper body. If it says mineral oil, plan on a DOT caliper (a Hope Tech 4 V4 works) or the moto brake route below.
Talaria X3 foot brake
There are two options for the X3:
- Talaria X3 Foot Brake Mount Bracket. Uses an HSK master cylinder and comes with a line for the stock caliper. DOT 4 or DOT 5.1 only, so the same fluid check applies.
- Talaria X3 Moto Foot Brake Kit. Comes with an Ultra Bee OEM caliper, the X3 foot brake assembly and a steel-braided line, pre-bled with Motul DOT 5.1. It also needs a moto brake caliper bracket (dual for hand plus foot, single for foot only) and a 240mm moto brake rotor. The brackets only work with 240mm rotors.
Light Bee X foot brake
The Light Bee foot pedal we list is a hydraulic rear foot brake that replaces the hand master cylinder. It takes DOT 4 or DOT 5.1 only, and the listing says it won't work with the stock Light Bee brakes, which use mineral oil. Pair it with a DOT caliper (the listing recommends a Hope Tech V4 or E4). Because of clearance, you lose the front-most footpeg position.
To keep the stock hand brake as well, there are Light Bee dual caliper brackets that mount a second caliper on the stock 203mm rotor. If you want a foot brake on a full moto brake build with Ultra Bee calipers, send us your setup before ordering so we can match the pedal, line and caliper.
Moto brake brackets: what they do and what else you need
A moto brake bracket is an adapter. The stock caliper mounts on these bikes are set up for a 203mm rotor. The bracket bolts to the factory mounting points and moves the caliper out to where an Ultra Bee caliper lines up with a 240mm rotor. No frame modification is needed.
| Bracket | What it's for | Fits | Does not fit |
|---|---|---|---|
| Moto Brake Dual Caliper Bracket | Two Ultra Bee calipers on the rear rotor (foot + hand). Includes a disc guard | Light Bee (all years), E Ride Pro S / SS 2.0 / SS 3.0 / SR, Talaria X3 / MX3 / MX4 | Talaria MX5 |
| Moto Brake Single Caliper Bracket | One Ultra Bee caliper on the rear, run by a foot or hand master | Light Bee X (all years), E Ride Pro SS 1.0 / 2.0 / 3.0 / Pro S / SR, Talaria X3 / MX3 / MX4 | Talaria MX5 |
| Front Moto Brake Bracket | Ultra Bee caliper on the front, comes with wheel spacers | Light Bee, E Ride Pro SS 1.0 / 2.0, Talaria X3 / MX3 / MX4 | Not listed for MX5 |
The bracket is just the mount. To finish the job you need:
- A 240mm moto brake rotor for your bike. The fixed 240mm rotor comes in front and rear versions for the Light Bee, Talaria X3 / MX3 / MX4 and E Ride Pro, and is 2.1mm thick (stock is 203mm x 1.8mm). There's also a floating 240mm x 3.5mm version for the same bikes, except the E Ride Pro SR / 3.0.
- An Ultra Bee caliper. The front and rear Ultra Bee OEM calipers both come with their caliper bracket, pads and a banjo bolt with crush washers.
- A master cylinder and line. For a hand brake, the Ultra Bee rear (left) or front (right) master cylinder fits any bike with the Ultra Bee caliper conversion. We sell one steel-braided rear hand brake line and one steel-braided foot brake line. Each one fits the Ultra Bee, plus moto brake builds on the Light Bee, Talaria X3 / MX3 / MX4 / MX5 and E Ride Pro S / SS / SR, so there's no per-bike version to pick.
If you only want a stronger rear hand brake and no pedal, the easy route is the Ultra Bee rear hydraulic brake kit for Light Bee and E Ride Pro (there's a Talaria X3 / MX3 / MX4 version too). It includes the caliper, master cylinder, steel-braided line, a 240mm x 2.5mm rotor and the bracket, and it ships pre-bled. Brake cutoff switch wiring isn't included, so if you want the motor to cut out when you pull the lever, plan to wire that separately. Neither version fits the Talaria MX5.
A middle step: 220mm rotors
If you want a bit more bite without a caliper swap, there's a 220mm x 2.3mm rear rotor for the Light Bee (all years), E Ride Pro SS 1.0 / 2.0 / Pro S and Talaria X3 / MX3 / MX4. It does not fit the Ultra Bee, E Ride Pro 3.0 / SR or Talaria MX5. The stock caliper mount is set up for 203mm, so plan on a 220mm caliper adapter.
Fitment table: what fits which bike
This table only lists what the product listings state. If your bike isn't in a row, assume it doesn't fit until we confirm it.
| Part | Ultra Bee | Light Bee X | Talaria X3 (xXx) | Talaria MX3 / MX4 | Talaria MX5 |
|---|---|---|---|---|---|
| Ultra Bee foot brake mount bracket | Yes, all years | No | No | No | No |
| Ultra Bee dual caliper bracket (stock 240mm) | Yes | No | No | No | No |
| Talaria foot brake mount bracket (DOT 4) | No | No | No | Yes | Yes (no line sold) |
| Talaria X3 foot brake bracket / moto foot brake kit | No | No | Yes | No | No |
| Moto brake dual or single caliper bracket | Not needed | Yes | Yes | Yes | No |
| Front moto brake bracket | Not needed | Yes | Yes | Yes | Not listed |
| 240mm moto brake rotor | Stock size | Yes | Yes | Yes | No |
| 220mm rotor upgrade | No | Yes | Yes | Yes | No |
| Ultra Bee rear hydraulic brake kit (pre-bled) | Not needed | Yes | Yes | Yes | No |
| Ultra Bee OEM front / rear caliper | Yes, all years | With moto brake bracket | With moto brake bracket | With moto brake bracket | No bracket listed |
| Ultra Bee OEM brake assembly (pre-bled) | 2023 to 2025 | No | No | No | No |
A note on the 2026 Light Bee X: it moved to forged 4-piston brakes and a new multi-link rear suspension. The bracket listings say "Light Bee, all years," but they may have been written before the 2026 update. If you have a 2026, send us a photo of your rear caliper mount and reservoir cap before you order so we can confirm.
OEM replacement parts, and when stock is fine
Plenty of riders don't need an upgrade. If the brakes stopped you fine until you crashed, bent a lever or wore out the pads, replace like for like.
Ultra Bee OEM parts people need most:
- Complete brake assembly. The OEM Ultra Bee brake assembly comes in front or rear, with the master cylinder, line and genuine caliper, pre-bled, for 2023 to 2025 Ultra Bees. It's the fastest fix after a crash rips a line or cracks a master cylinder, since you skip bleeding.
- Calipers. The front and rear OEM calipers come with the caliper bracket, pads and banjo hardware.
- Master cylinders. The front (right) and rear (left) OEM master cylinders ship dry and take DOT 3, DOT 4 or DOT 5.1. The threads are M10 x 1.25, so your stock lines thread straight in.
- Levers. The shorty lever set keeps the stock parking brake. Some folding breakaway lever sets do not, so check the listing if you use it.
Talaria OEM brakes come from more than one supplier depending on model and year. LBN and FAST parts are listed separately (FAST for the MX4 / X3, LBN for the MX3 / MX4 and MX5). Before you order a caliper, master cylinder or line, match the brand printed on your current part, and don't mix brands unless the listing says they go together.
When stock is fine: if the lever feels firm, fresh pads and a good bleed usually fix "weak brakes." Upgrade when the brakes fade on long descents, when you've added power, or when you want the foot pedal.
Brake pads and rotors: the basics
- Pads. Each set covers one caliper (two pads), and pads are caliper-specific. The Stark Varg / Nibbi pads used on the Ultra Bee big brake kit do not fit stock Ultra Bee calipers, and E Ride Pro SR / 3.0 pads fit the Talaria MX5 Pro. Bed new pads in with a series of controlled stops before you trust them on a trail.
- Rotors. Replace a rotor if it's below the minimum thickness stamped on it, warped enough to pulse at the lever, or cooked blue. Use blue thread locker on the bolts and tighten them in a star pattern.
- Contamination. If a pad gets brake fluid or chain lube on it, replace it.
Surron brake fluid: DOT vs mineral oil
This is where most foot brake conversions go wrong. DOT fluid and mineral oil systems use different seals. Never mix them, and never put one in a system built for the other. Here's what the listings say:
| Bike / part | Fluid |
|---|---|
| Ultra Bee OEM master cylinders and Ultra Bee foot brake master cylinder | DOT 3, DOT 4 or DOT 5.1 |
| Talaria MX3 / MX4 / MX5 foot brake bracket | DOT 4 only |
| Talaria X3 foot brake bracket | DOT 4 or DOT 5.1 only |
| Talaria X3 moto foot brake kit | Pre-bled with Motul DOT 5.1 |
| Light Bee hydraulic foot brake (pedal unit) | DOT 4 or DOT 5.1 only |
| Stock Light Bee brakes (before 2026) | Mineral oil, so don't connect a DOT foot master to a stock caliper |
| Stock 2026 Light Bee X brakes | Not confirmed yet; check the reservoir cap |
| Stock Talaria brakes | Depends on brake supplier; check the cap or caliper |
Never use DOT 5 (silicone). It isn't the same as DOT 5.1.
Bleeding tips that apply to all of these:
- Keep the reservoir topped up while you bleed so you don't pull air in.
- On a foot brake the master cylinder sits low, so air tends to sit up at the caliper. If the pedal stays soft, take the caliper off and hold it higher than the master while you bleed.
- Use new copper crush washers on every banjo you open. The titanium M10 x 1.25 banjo bolt listing gives 20 to 25 N·m (15 to 18 lb-ft); your bike's manual wins if it differs.
- DOT fluid strips paint. Cover the bodywork and wipe spills right away.
- Before riding, check that the lever or pedal is firm, the wheel spins free, and the brake cutoff and brake light still work.
If it still feels spongy after two careful bleeds, take it to a shop. Don't ride it.
Ultra Bee big brake kit
Some Ultra Bee riders, especially heavier riders or those riding steep downhill, want more than the stock 240mm setup. The Ultra Bee big brake dual caliper bracket runs a Nibbi Racing caliper (the same one used on the Stark Varg) on a 270mm rotor, and it needs both of those parts to work. If you go this way, buy Stark Varg / Nibbi pads, not stock Ultra Bee pads.
FAQ
Do Ultra Bee brakes fit a Surron Light Bee X?
Yes, with a moto brake bracket and a 240mm rotor made for the Light Bee. The caliper won't bolt to the stock mount on its own. The pre-bled Ultra Bee rear brake kit includes everything for a rear hand brake. 2026 owners should check with us first.
Can I run a foot brake and keep the hand rear brake?
Yes, with a dual caliper bracket. On the Ultra Bee, use the Ultra Bee dual caliper bracket and a second OEM rear caliper. On the Light Bee, Talaria X3 / MX3 / MX4 or E Ride Pro, use the moto brake dual caliper bracket with a 240mm rotor.
What brake fluid does the Surron Ultra Bee use?
DOT fluid. The Ultra Bee OEM master cylinders are listed for DOT 3, DOT 4 or DOT 5.1. Don't use mineral oil or silicone DOT 5.
Will the Ultra Bee foot brake kit fit my Talaria or Light Bee?
No. The Ultra Bee foot brake bracket and its master cylinder are Ultra Bee only. The Talaria MX3 / MX4 / MX5 and Talaria X3 each have their own foot brake brackets, and the Light Bee uses a different foot brake unit.
Do moto brake brackets fit the Talaria MX5?
No. The dual and single caliper moto brake brackets, the 240mm moto rotors and the Ultra Bee rear brake kits all exclude the MX5. The Talaria foot brake mount bracket does fit the MX5, but no MX5 line is sold for it yet.
Do I need to bleed the brakes after installing a kit?
Pre-bled kits (the Ultra Bee rear brake kits for Light Bee and Talaria, the Talaria X3 moto foot brake kit and the OEM Ultra Bee assemblies) are made to bolt on without bleeding, as long as you don't open the system. Anything that ships dry, like the foot brake brackets and loose master cylinders, has to be filled and bled.
If you're not sure which brake parts are on your bike, send us a photo of the caliper and the reservoir cap and we'll tell you what fits.


Share:
Talaria Display Replacement Guide: Which Screen Fits Your X3 (xXx), MX3, MX4, MX5 or X3 Pro
Talaria Sting MX3 vs MX4 vs MX5 Parts: What's Shared, What Isn't and How to Order the Right Replacement